How to Fix Computer Turns On but No Display on Monitor Error

You are not the only one who has faced this error - "Computer Turns On but No Display on Monitor", but there are many computer users like you who have faced this error and have also complained about it.

How to Fix Computer Turns On but No Display on Monitor Error
How to Fix Computer Turns On but No Display on Monitor Error

But now don't worry about that because today I am going to tell you 5 ways that you will be able to solve this error by following it.

How to Fix "Computer Turns On but No Display on Monitor Error"

Just follow the bellow steps to Fix Computer Turns On but No Display on Monitor Error -

Check Your Monitor First

If your computer is starting but nothing is being displayed, then you must check your monitor once before taking anything else step.

Before you tamper with other parts of your computer, and before making things more complicated, check the monitor once.

First of all, check the Power Light of your monitor whether it is on or not.

If your monitor is not on, then you remove the monitor plug and check it again by plugging in.

If your monitor is still not on, then you will have to give your monitor for repair.

And if your monitor turns on and still nothing is displayed, then you have to follow the tips given below.

Restart Your PC or Computer

Check that your PC is completely restarted, their all parts are in running state. 

Because sometimes the computer goes into standby or sleep mode so that we do not see anything on the monitor.

So you check whether all the parts are in the running state and if not, then restart your computer again.

Disconnect all Peripherals

Sometimes it happens that the peripherals that we connect to our computers become the cause of this problem.

So you have to remove all the peripherals once and then restart the computer and check whether your computer is working perfectly.

Here is how you do it :
  1. Press and hold the power button until your Pc turns off.
  2. Remove all your peripherals.
  3. Now try to turning on your Pc again.
Now if your computer is properly booted, then it means that this issue was coming due to one peripheral device.

Now you have to install the peripherals one by one again and check which is the device that caused this issue and replicate that device.

If your computer still cannot boot properly, follow the steps given below.

Clear the CMOS

Clearing the BIOS memory on your motherboard will return the BIOS factory to their default level. A BIOS may be a misunderstanding why your PC will not start all the way.

CMOS Battery

Here how you can do it:
  1. Press and hold the power button until your Pc turns off.
  2. Disconnect the AC power cord from the supply and then open your computer case.
  3. On your motherboard remove your CMOS battery with a non-conductive screwdriver.
  4. Now wait for 5 mint and reinstall your CMOS battery.
  5. Now Re – Connect your AC Power cord to the power supply and turn on your Pc.
If your computer still cannot work properly, follow the steps given below.

Check Your Power Supply

Now, even after doing all this, your problem is not getting resolved, then once you check your power supply, to check whether it is working properly or not.

Now if everything is correct even then your monitor is not showing anything, then you need to give your computer to the repair shop.

Final Words

So friends, I hope that all of you will like this article and it will be helpful for you, then share it with your friends and family.

If you also know any other solution related to this error that I have not mentioned in this article, then you can comment by telling us.

Post a Comment

0 Comments