Header Ads Widget

Responsive Advertisement

Fixed DNS Probe Finished No Internet Error

The DNS probe finished no Internet Error can occur during browsing, which is why it is impossible to visit the web page. The reason is the unavailability of the DNS server for this PC.

This does not have access to the web page.

Fixed DNS Probe Finished No Internet Error
Fixed DNS Probe Finished No Internet Error


  1. Please check your Internet connection
  2. To check the cable, are using network device (router, modem, etc.) restart , please.
  3. Allow Chrome to access your network in your firewall and antivirus settings.

If it is already listed as a program that has been granted access to the network, remove it from the list and try adding it again.

Solve the DNS Probe Finished No Internet Error

  1. Turn off the modem and / or router for a couple of minutes, then turn it on again, it also makes sense to reset the hardware on it, for which there is often a “Reset” button on the back of the case.
  2. Contact your provider for help - it’s possible that you’re not only experiencing network problems.
  3. Reset settings.

This requires launching the Command Prompt with administrator rights, entering the following queries and confirming them by pressing Enter:
  1. ipconfig / release
  2. ipconfig / flushdns
  3. ipconfig / renew
  4. netsh int ip set dns
  5. netsh winsock reset

Update drivers on network devices.

This applies to the modules of wireless and wired Internet installed in the computer. To find out their names, open the Device Manager and look in the “Network Cards (Adapters)” section.

Find the latest drivers for this equipment on the network and install them on your PC. 
  1. Make sure the proxy is turned off.
  2. Open Internet Explorer go to
  3. Internet Options”
  4. Connections”
  5. Network Settings
  6. The line "Use proxy " should be ticked. Follow the "Advanced" - in all lines there should be empty.
  7. If not, delete everything, after it confirm the action by clicking OK and reboot the system.

Use alternate DNS.
  1. Control Panel
  2. Network and Sharing Center”
  3. Change adapter settings
  4. Right-click on your Internet connection
  5. Properties”
  6. Internet Protocol version 4”
  7. Properties

In this window, tick off the line “Use the following .” and in two lines write the DNS from Yandex and Confirm the changes by clicking on OK. 
  1. Check the inclusion of the DNS client.
  2. “Control Panel”
  3. “Administrative Tools”
  4. “Services”.

The DNS client in the "Name" column. Regarding it, the “Status” column should be “Running”. If there is empty or another value, then double-click to open the item. On the "General" tab in the "Startup Type" line, select the "Automatically" criterion, and below the "Status" line, click on "Run".

Save the changes by clicking on Apply. This in most cases resolves the DNS probe finished no Internet Error

Wireless LAN

The wireless LAN icon in the task tray has a yellow triangle with an exclamation mark, and when you hover over it, it says "No Internet Access".

When you click the wireless LAN icon, "Restricted" is displayed below the corresponding SSID.

Eventually, the fix shown on this Google Chrome error page, the router restart, fixed it.

Final Words

So friends today, I told you the solution of DNS Probe Finished No Internet Error and I hope that your error will be solved.

If you still face any problem, you can comment by telling us, we are ready to solve your problem.

Post a Comment